Cleaning must be silent
Cleaning should be as quiet as possible to avoid disturbing guests.
Hotels & apartments
Hotel public areas mix carpet and hard flooring, and guests are asleep when the cleaning happens. C2 switches mode automatically and stays below 60 dB(A).
Typical zonesLobby carpet areaLobby hard flooringCorridors
The problem
Oil, dust, footfall and the hours you can clean decide the plan before a model does.
Mixed floor materials
Carpet and hard flooring coexist, so a single cleaning mode cannot cover the lobby.
Lobby presentation
The lobby is the first thing a guest sees and has to look immaculate at any hour.
One setup for the daily cleaning loop
The machines, the zones they cover and the records that prove what happened.
- 01Lobby carpet areaContinuous vacuum-sweeping2–4 passes/dayC2
- 02Lobby hard flooringWet mopping2–4 passes/dayC4
- 03CorridorsWet mopping / vacuum-sweeping2 passes/dayC2
Zone-based tasksZones scheduled by frequency
Digital managementTasks, coverage and anomalies stay traceable
Our approach
Three choices that change how the site runs.
Carpet recognised automatically
C2 detects carpet and adjusts the cleaning mode without manual intervention.
Quiet wet mopping
Wet mopping stays below 60 dB(A), so it can run overnight without disturbing guests.
Reaches under the furniture
The ultra-slim body cleans under tables, luggage racks and seating.
Before and after
The same work, before and after, on the metrics that matter to this site.
| Metric | Manual cleaning | With BRAWN robots |
|---|---|---|
| Working hours | Overnight manual cleaning disturbs guests | Quiet operation, usable overnight |
| Carpet cleaning | Manual vacuuming is slow | Automatic detection and continuous sweeping |
| Lobby coverage | Coverage limited to the overnight window | Quiet C2 passes extend lobby coverage |
Comparison figures are typical-scenario estimates from the solution handbook, not client measurements.
How it is delivered
From the first survey to a running fleet: the same four steps on every project.
Site survey
A walk-through of areas, surfaces, obstacles, lift and access-control conditions, plus the plumbing available for a docking station.
Configuration and estimate
Model mix, zone plan, cleaning frequency and consumable estimate. A labour comparison is included only when the customer supplies a reliable baseline; the current answer set has no verified before-and-after labour case.
Deployment plan
Staging plan, charging and docking positions, network and lift integration scope, and a training schedule for the operating team.
Remote diagnosis
The cloud platform reports equipment status and faults, and self-check covers sensors, motors and the main controller. Partners receive remote technical support for genuine product faults; site-network, water or drainage problems remain site responsibilities.
Deployed projects
No published case for this scenario yet
We can still run a sizing estimate for your site, and arrange a visit to a comparable project where the client agrees.
Adjacent scenarios
The next scenarios in the line.
