AGIBOT C2 Compact Unattended Cleaning Robot
AGIBOT C2 is slim enough to work under tables and shelving, and self-sufficient enough to be left alone: it dries its own mops, empties its own dustbin and refills its own tank. Weighing 17.5 kg, it climbs 10° and covers around 300–700 m²/h.
- 17.5 kgTotal weight
- 10°Gradeability
- 4 hScrubbing runtime
Machine and docking station
C2
Slim Enough to Work Under the Furniture
A large machine cleans around a room. C2 cleans the room, including the parts nobody has been able to reach with a mop.
Under Tables and Desks
The low body passes beneath meeting tables and desk runs that are normally cleaned by hand.
Under Shelving
Reaches beneath shelving and display units where debris collects and is rarely cleared.
17.5 kg Total Weight
Light enough to be carried between floors by one person when that is simpler than a lift.
Climbs 10°
The steepest gradeability in the range, which covers ramps and sloped thresholds.
- Total weight
- 17.5 kg
- Gradeability
- 10°
- Cleaning width
- 390 mm
- Edge distance
- ≤50 mm
Three Cleaning Modes, Switched Automatically
Sweeping, vacuuming and wet mopping switch to suit the floor in front of the machine rather than the floor it was configured for.
Sweeping
Collects dust and debris on hard floor before the wet pass.
Vacuuming
Lifts fine dust from both hard floor and carpet, which sweeping alone leaves behind.
Wet Mopping
Wet cleaning with water recovery, for entrances and food and beverage areas.
It Decides How Hard to Clean
The machine that is left alone overnight has to be able to tell a light dusting from a spill, because nobody is there to set it.
Recognises Debris Type
Distinguishes between fine dust, solid debris and liquid, and picks the corresponding mode.
Reads Soiling Level
Adjusts how much water and pressure the area receives rather than applying one setting everywhere.
Adjusts Mid-Route
The strategy changes as the machine works, without returning to a start point or waiting for a new task.
Left Alone for a Full Day
Unattended means more than automatic charging. It means that when the next shift arrives, nothing has to be washed, emptied or filled by hand.
- Cleaning
- Return to station
- Emptying and mop drying
- Charging
- Next mission
Mop Self-Drying
Mops are dried at the station after each run, which is what stops the smell that wet mops develop overnight.
Automatic Emptying
Debris is transferred into the station’s 10 L bin, so the on-board dustbin does not need emptying daily.
Automatic Refill and Drain
Clean water and wastewater are handled at the station, at 4 L and 3.5 L.
Automatic Charging
Returns on low battery and is ready again after about two hours.
Moves Between Floors on Its Own
A building is rarely one floor. C2 talks to the equipment that already controls movement through the building.
Autonomous Elevator Use
Calls the lift, selects the floor and continues on arrival without an operator riding along.
Gate and Turnstile Crossing
Passes through access gates that would otherwise stop a cleaning machine at the boundary of its zone.
Access-Control Integration
Works with the building’s access control where the deployment supports it.
One Map Across Floors
Schedules are managed per floor from the same place, so a multi-floor site is still one deployment.
Where C2 Works Best
C2 suits buildings with a lot of furniture, a lot of small rooms, and nobody available to look after a machine during the day.
Offices
Desk runs, meeting rooms and carpeted areas cleaned outside working hours.
Healthcare Facilities
Patient rooms and corridors where a compact, quiet machine can work without disrupting care.
Retail and Convenience Stores
Sales floors and back rooms cleaned between trading hours.
Hotels and Hospitality
Guest floors cleaned overnight, with the machine returning itself to the station before morning.
Compatible surfacesCarpet · Marble · PVC · Tile
AGIBOT C2 Technical Specifications
General specifications
- Weight
- 17.5 kg
- Operating speed
- 0.4–0.6 m/s
- Edge distance
- ≤50 mm
- Gradeability
- 10°
- Form factor
- Ultra-slim, cleans under furniture
Cleaning specifications
- Cleaning width
- 390 mm
- Cleaning efficiency
- 300–700 m²/h
- Cleaning modes
- Sweeping · vacuuming · wet mopping
- Adaptive cleaning
- By debris type and soiling level
Battery and runtime
- Clean water tank
- 4 L
- Wastewater tank
- 3.5 L
- Dustbin capacity
- 1.3 L
- Battery capacity
- 25 Ah
- Charging time
- 2 h
- Scrubbing runtime
- 4 h
Docking station
- Dustbin volume
- 10 L
- Unit weight
- 38 kg
- Functions
- Auto-recharge · auto refill and drain · auto-empty · mop drying
Navigation and connectivity
- Multi-floor operation
- Elevator, gate and access-control integration
- Navigation technology
- LiDAR and visual fusion
Figures are stated for the conditions under test and vary with floor, soiling and configuration.
Service and Support
Sizing before delivery, commissioning on site, and a service path for the working life of the machine.
Pre-sales survey and sizing
We check the furniture clearances and the rooms that need covering, since those decide how much of the floor C2 can actually reach.
Commissioning and training
Zones are mapped per floor and the cleaning team is trained to run them.
Consumables and spares
Mops, filters and brushes are supplied through the same team that installed the machine.
